Skip to main content
Small, medium and large prototyping boards

Small, Medium and Large

Ever since we started, we’ve stocked full size and half size prototyping boards. The standard sizes allow the boards to be stacked together, which is why we called ourselves protostack.

This month we are stocking a new board, which is approximately a quarter of the size of the full size one. Instead of calling it the “quarter size board”, we’ve renamed all the various sizes to Small, Medium and Large.

The new board measures 58.42 x 68.58mm (2.3″ x 2.7″) and is available right now for $4.50.

Small prototyping boards

The diagram below shows the 3 board sizes in relation to each other. As you can see, all 3 board sizes are stackable with the vertical blue lines showing how the mounting holes line up.

Small, medium and large  prototyping boards

The small boards can very easy be stacked together as shown below.

Stack of small boards

When stacking the small board with one of the medium or large boards, you will need to support one end with a stacking header or something similar. This is shown in the photo below.

Stack of small and medium boards

Related News

USBASP Device Driver - signed

USBASP programmer 2.0

We recently selected a new USBASP supplier who has made a few improvements. Addition of...

Finishing the year off with 13 new products

It's been a while since we've had new stock in, but the drought is over....

What can you build with logic chips?

There is a bit over 2 weeks left for the 7400 Contest with entries closing...

Leave a reply

Your email address will not be published. Required fields are marked *

Shopping Cart