Description
These jumper wires are just what you need for prototyping on a PCB or Breadboard. At either end there are 40 individual male connectors whilst in the middle, the wires are joined in a ribbon.
Simply pull the ribbon apart and split off what you need. For instance if you need a 4 pin cable, simply pull 4 cables off the ribbon.
| Colour | Rainbow |
|---|---|
| Number of Pins/Conductors | 40 |
| Rated Current | 2A |
| Length | 150mm |
| Conductor Material | Copper |
| Insulation Material | Noryl Thermoplastic, PVC |
| Operating Temperature | -20°C to 70°C |
| Rated Voltage | 250V |
| Wire Gauge | 24 AWG |
| Width | 56mm |
| Pin/Conductor Spacing | 1.4mm, 2.54mm |
| Minimum Insulation Resistance | 90 MΩ/km |
| Maximum Conductor Resistance | 87.2 Ω/km |
| Connector Type | Dupont 1P Male |
| Capacitance core/core | 50 pF/m |
Be the first to review “150mm Male to Male Jumpers – Ribbon of 40 wires”
You must be logged in to post a review.
Reviews
There are no reviews yet.